Renewable Design for Pharmaceutical Nylon66 Pleated Filter Made in China
Our corporation since its inception, constantly regards solution excellent as organization life, constantly increase creation technology, increase merchandise good quality and continually strengthen business total quality management, in strict accordance while using the national standard ISO 9001:2000 for Renewable Design for Pharmaceutical Nylon66 Pleated Filter Made in China, Along with the tenet of “faith-based, customer first”, we welcome shoppers to simply call or e-mail us for cooperation.
Our corporation since its inception, constantly regards solution excellent as organization life, constantly increase creation technology, increase merchandise good quality and continually strengthen business total quality management, in strict accordance while using the national standard ISO 9001:2000 for TS Made Nylon 66 pleated cartridge, Make sure you feel cost-free to send us your specifications and we’ll respond to you asap. We have got a professional engineering team to serve for the every single thorough needs. Free samples may be sent to suit your needs personally to know far more facts. So that you can meet your desires, be sure to genuinely feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
◆Naturally hydrophilic Nylon 6,6 membrane for sterile filtration, absolute rating ≥99.99%
◆Chemical resistant to alkaline solutions and organic solvents, suitable for sterile filtration of those liquids
◆High low rate and cost-effective High non-specific adsorption and low extractables
◆100% integrity test
◆Replace Sartorius ,Pall or Millipore Filter is available
•Wine, beer, mineral water, pure water filtration;
•Solvents sterile filtration for analytical determination such as HPLC;
•Fine chemicals, especially ketone, ester, ether,
•Ultrapure water and disk, display, multi silicon process water in Electronics;
•Digital inks
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Hydrophilic Nylon6,6 Membrane | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65, 1.0, 3.0, 5.0um | |||||
| Inner core: | Reinforced Polypropylene | |||||
| Outer Cage, End caps: | Reinforced Polypropylene | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | ||||
| Inner Diameter | 33mm(1.30”) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 60℃ (140℉) | ||||
| Max.Operating Temperature.: | 80℃ (176℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 6-14 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 135℃(275℉), cumulative Time: 3hours, autoclave 30 minutes (optional) |
|||||
| Cartridge Safety | Endotoxin: | ＜0.25 EU/ml | ||||
| Extractables: | 0.03g / 10″ | |||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| P - Pharmaceutical | PNN | 010-0.1μm | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| E - ELECTRONIC | 020-0.2μm | CN-226/FIN | 20-20″ | E-epdm ; T-teflon (encaptulated) | ||
| F - Food&Beverage | 045-0.45μm | BN-222/FIN | 30-30″ | V-viton | ||
| 100-1.00μm | BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | |||
| CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.45um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PPNN045AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||
Our corporation since its inception, constantly regards solution excellent as organization life, constantly increase creation technology, increase merchandise good quality and continually strengthen business total quality management, in strict accordance while using the national standard ISO 9001:2000 for Renewable Design for Pharmaceutical Nylon66 Pleated Filter Made in China, Along with the tenet of “faith-based, customer first”, we welcome shoppers to simply call or e-mail us for cooperation.
TS Made Nylon 66 pleated cartridge, Make sure you feel cost-free to send us your specifications and we’ll respond to you asap. We have got a professional engineering team to serve for the every single thorough needs. Free samples may be sent to suit your needs personally to know far more facts. So that you can meet your desires, be sure to genuinely feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
